STEP 1 Slip the Velcro strap through the small loop of the elastic extension. Pull about an inch or so through.
STEP 2 Wrap the Velcro tightly around the goal skate front post, fuzzy side out, keeping the elastic extension at the front. Press the Velcro firmly in place.
STEP 3 Pinch the end of the Velcro and push it through the small loop of the elastic extension. Pull tight and wrap around the post again. Press all the Velcro firmly.
STEP 4 Add the cold weather zip tie through the small loop of the elastic extension and secure it tightly on top of the Velcro. Try to keep it centred. Trim the excess zip tie and slide the head back behind the post.
STEP 5 Remove the laces from the toe bridge of the goalie leg pads.
STEP 6 With the ToeHook facing upward, line it up with the holes vacated by the laces. Secure the ToeHook with the machine screws and the t-nuts as tight as possible.
STEP 7 To attach, slide the loop attached to the goal skate, into the Toe Hook and pull down into place. Finish securing the skate and leg pad as usual.
STEP 8 To remove, simply roll the loop over the hook and slide out.
Podle zákona o evidenci tržeb je prodávající povinen vystavit kupujícímu účtenku. Zároveň je povinen zaevidovat přijatou tržbu u správce daně online; v případě technického výpadku pak nejpozději do 48 hodin.